Advertisement
Command Modes
Command
History
Example
Related
Commands
show power inline
c s
Syntax
Command Modes
Command
History
1138
|
Power over Ethernet (PoE)
EXEC
EXEC Privilege
Version 8.4.1.0
Inline Power Used removed from output.
Version 7.7.1.0
Introduced on S-Series
Version 4.2.1.0
Introduced on C-Series
FTOS(conf-if-range-gi-0/1-48)#do show power detail
Unit
Total
Logic
Power
Power
Available
Consumed
(Watts)
(Watts)
-------------------------------------------------------------------------------
0
470.00
150
Table 43-1. show power detail Command Output Fields
Unit
Catalog Name
Slot ID
Total Power Available
Logic Power Consumed
Inline Power Available
Inline Power Allocated
Inline Power Consumed
Inline Power Remaining
power inline
power inline priority
Display the ports that are enabled with PoE and the amount of power that each is consuming.
show power inline
EXEC
EXEC Privilege
Version 8.4.1.0
Operational Status removed from output.
Version 7.7.1.0
Introduced on S-Series
Version 7.5.1.0
Introduced on C-Series
Inline
Inline
Power
Power
Available
Allocated
(Watts)
(Watts)
320.00
308.00
(S-Series only) The stack member unit ID.
(C-Series only) Displays the component's Dell Force10 catalog number.
(C-Series only) Displays the slot number in which the line card or RPM is
installed.
The total power available in the stack member or chassis.
Note: On the S-Series a maximum of 790W can be allocated for PoE,
even if you add the 470W external power supply.
The power consumed by the system logic.
Power available for PoE (whatever was configured using the
command. Default: 320 watts
Total power allocated to the ports.
Total power consumed by connected devices.
Difference between power available and power allocated.
Enable power to be supplied to a device connected to a port.
Set the PoE priority of the selected port
Inline
Inline
Power
Power
Consumed
Remaining
(Watts)
(Watts)
190.00
12.00
power-budget
Advertisement
