Advertisement
private-vlan mapping secondary-vlan
c s
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
show interfaces private-vlan
c s
Syntax
Parameters
Defaults
1158
|
Private VLAN (PVLAN)
show vlan private-vlan mapping
switchport mode private-vlan
Map secondary VLANs to the selected primary VLAN.
[no] private-vlan mapping secondary-vlan vlan-list
To remove specific secondary VLANs from the configuration, use the no private-vlan mapping
secondary-vlan vlan-list command syntax.
vlan-list
Enter the list of secondary VLANs to associate with the selected primary VLAN, as described
above. The list can be
convention for range input.
none
INTERFACE VLAN
Version 7.8.1.0
Introduced on C-Series and S-Series
The list of secondary VLANs can be:
•
Specified in comma-delimited or hyphenated-range format.
•
Specified with this command even before they have been created.
•
Amended by specifying the new secondary VLAN to be added to the list.
private-vlan mode
show interfaces private-vlan
show vlan private-vlan
show vlan private-vlan
mapping
switchport mode private-vlan
Display type and status of PVLAN interfaces.
show interfaces private-vlan [interface interface]
interface interface
none
Display primary-secondary VLAN mapping.
Set the PVLAN mode of the selected port.
in comma-delimited or hyphenated-range format, following the
Set the mode of the selected VLAN to community, isolated, or primary.
Display type and status of PVLAN interfaces.
Display PVLANs and/or interfaces that are part of a PVLAN.
Display primary-secondary VLAN mapping.
Set the PVLAN mode of the selected port.
(OPTIONAL) Enter the keyword
interface for which to display PVLAN status.
interface
, followed by the ID of the specific
Advertisement
