Advertisement
show ip pim tib
c e s
Syntax
Parameters
Command Modes
Command
History
Example
1118
|
PIM-Sparse Mode (PIM-SM)
View the PIM tree information base (TIB).
show ip pim tib [group-address [source-address]]
group-address
(OPTIONAL) Enter the group address in dotted decimal format (A.B.C.D).
source-address
(OPTIONAL) Enter the source address in dotted decimal format (A.B.C.D).
EXEC
EXEC Privilege
Version 8.1.1.0
Version 7.8.1.0
Figure 41-12. show ip pim tib Command Example
FTOS#show ip pim tib
PIM Multicast Routing Table
Flags: D - Dense, S - Sparse, C - Connected, L - Local, P - Pruned,
R - RP-bit set, F - Register flag, T - SPT-bit set, J - Join SPT,
M - MSDP created entry, A - Candidate for MSDP Advertisement,
K - Ack-Pending State
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, 226.1.1.1), uptime 01:29:19, expires 00:00:52, RP 10.211.2.1, flags: SCJ
Incoming interface: GigabitEthernet 4/23, RPF neighbor 10.211.1.2
Outgoing interface list:
GigabitEthernet 8/0
(*, 226.1.1.2), uptime 00:18:08, expires 00:00:52, RP 10.211.2.1, flags: SCJ
Incoming interface: GigabitEthernet 4/23, RPF neighbor 10.211.1.2
Outgoing interface list:
GigabitEthernet 8/0
(*, 226.1.1.3), uptime 00:18:08, expires 00:00:52, RP 10.211.2.1, flags: SCJ
Incoming interface: GigabitEthernet 4/23, RPF neighbor 10.211.1.2
Outgoing interface list:
GigabitEthernet 8/0
(*, 226.1.1.4), uptime 00:18:08, expires 00:00:52, RP 10.211.2.1, flags: SCJ
Incoming interface: GigabitEthernet 4/23, RPF neighbor 10.211.1.2
Outgoing interface list:
GigabitEthernet 8/0
Table 41-6. show ip pim tib Command Example Fields
Field
(S, G)
uptime
expires
RP
Introduced on E-Series ExaScale
Introduced on S-Series
Description
Displays the entry in the multicast PIM database.
Displays the amount of time the entry has been in the PIM route table.
Displays the amount of time until the entry expires and is removed from
the database.
Displays the IP address of the RP/source for this entry.
Advertisement
