Advertisement
vlan forward-delay
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands
1176
|
Per-VLAN Spanning Tree plus (PVST+)
Set the amount of time the interface waits in the Listening State and the Learning State before
transitioning to the Forwarding State.
vlan vlan-range forward-delay seconds
To return to the default setting, enter no vlan forward-delay command.
vlan vlan-range
Enter the keyword
Range: 1 to 4094
forward-delay
Enter the keyword
seconds
FTOS waits before transitioning PVST+ to the forwarding state.
Range: 4 to 30 seconds
Default: 15 seconds
15 seconds
CONFIGURATION (conf-pvst)
Version 7.6.1.0
Support added for S-Series
Version 7.5.1.0
Support added for C-Series
Version 6.2.1.1
Introduced
vlan bridge-priority
vlan hello-time
vlan max-age
show spanning-tree pvst
vlan
followed by the VLAN number(s).
forward-delay
followed by the time interval, in seconds, that
Set the bridge-priority value
Change the time interval between BPDUs
Change the time interval before PVST+ refreshes
Display the PVST+ configuration
Advertisement
