Advertisement
1116
|
PIM-Sparse Mode (PIM-SM)
Table 41-5. show ip pim snooping tib Command Example Fields
Field
(S, G)
uptime
expires
RP
flags
Incoming interface
RPF neighbor
Outgoing interface list:
Description
Displays the entry in the PIM multicast snooping database.
Displays the amount of time the entry has been in the PIM multicast route
table.
Displays the amount of time until the entry expires and is removed from
the database.
Displays the IP address of the RP/source for this entry.
List the flags to define the entries:
•
S = PIM Sparse Mode
•
C = directly connected
•
L = local to the multicast group
•
P = route was pruned
•
R = the forwarding entry is pointing toward the RP
•
F = FTOS is registering this entry for a multicast source
•
T = packets were received via Shortest Tree Path
•
J = first packet from the last hop router is received and the entry is
ready to switch to SPT
•
K=acknowledge pending state
Displays the reverse path forwarding (RPF) interface towards the RP/
source.
Displays the next hop from this interface towards the RP/source.
Lists the interfaces that meet one of the following criteria:
•
a directly connect member of the Group.
•
statically configured member of the Group.
•
received a (*,G) Join message.
Advertisement
