Download Print this page

Dell Force10 TeraScale E Series Reference Manual page 1399

Ftos command line, ftos 8.4.2.7

Advertisement

Table 55-3. Fields in the show interfaces sonet with PPP Encapsulation (continued)
Field
IPCP State:
Internet address...
Peer address
MTU 1554...
LineSpeed
ARP type:...
Last clearing...
Queuing strategy.
0 packets...
Input 0 IP packets...
0 64-byte...
Received 0...
Output 0...
Time since...
Related
show interfaces switchport
Commands
show ip interface
sonet-port-recover detection-interval
e
Recovery interval to automatically clear a condition that could cause a SONET port to hang, and stop
sending and receiving data.
Syntax
sonet-port-recover detection-interval interval
Parameters
interval
Defaults
60 seconds
Command Modes
INTERFACE
Privilege Level
15 sys-hidden
Description
States if IPCP was successfully negotiated.
States whether an IP address is assigned to the interface. If one is, that address
is displayed.
Displays the PPP peer's IP address.
Displays link and IP MTU.
Displays interface's line speed.
Displays the ARP type and the ARP timeout value for the interface.
Displays the time when the
States the packet queuing strategy. FIFO means first in first out.
Displays the number of packets and bytes into the interface.
Displays the number of packets with IP headers, VLAN tagged headers and
MPLS headers.
The number of packets may not add correctly because a VLAN tagged IP
packet counts as both a VLAN packet and an IP packet.
Displays the size of packets and the number of those packets entering that
interface.
This information is displayed over 2 lines.
Any PPP packet less than 64 bytes in length will be padded out to 64 bytes
upon reception. This padding will be counted by the ingress byte counter.
Displays the type and number of error or other specific packets received.
This information is displayed over 3 lines.
Displays the type and number of packets sent out the interface.
This information is displayed over 2 lines.
Displays the time since the last change in the configuration of this interface.
Displays Layer 2 information about the interfaces.
Displays Layer 3 information about the interfaces.
Interval for SONET port recovery (in seconds(15-600)
show interfaces
counters where cleared.
SONET | 1399

Advertisement

loading