Advertisement
area nssa
c e s
Syntax
Parameters
Defaults
Command Mode
Command
History
area range
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
1008
|
Open Shortest Path First (OSPFv2 and OSPFv3)
Specify an area as a Not So Stubby Area (NSSA).
area area-id nssa [default-information-originate] [no-redistribution] [no-summary]
To delete an NSSA, enter no area area-id nssa.
area-id
no-redistribution
default-information-or
iginate
no-summary
Not configured
ROUTER OSPF
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version 6.1.1.1
Summarize routes matching an address/mask at an area border router (ABR).
area area-id range ip-address mask [not-advertise]
To disable route summarization, use the no area area-id range ip-address mask command.
area-id
Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a number from
zero (0) to 65535.
ip-address
Specify an IP address in dotted decimal format.
mask
Specify a mask for the destination prefix. Enter the full mask (for example,
255.255.255.0).
not-advertise
(OPTIONAL) Enter the keyword
(that is, the Type 3 summary-LSA is suppressed and the component networks remain
hidden from other areas.)
No range is configured.
ROUTER OSPF
Version 7.8.1.0
Version 7.6.1.0
Specify the OSPF area in dotted decimal format (A.B.C.D) or enter a number
from 0 and 65535.
(OPTIONAL) Specify that the
routes into the NSSA. You should only use this command in a NSSA Area
Border Router (ABR).
(OPTIONAL) Allows external routing information to be imported into the
NSSA by using Type 7 default.
(OPTIONAL) Specify that no summary LSAs should be sent into the NSSA.
Introduced support for Multi-Process OSPF.
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
not-advertise
Introduced support for Multi-Process OSPF.
Introduced on S-Series
redistribute
command should not distribute
to set the status to DoNotAdvertise
Advertisement
