Advertisement
Command
Version 7.8.1.0
History
Version 7.4.1.0
Example
Figure 38-23. debug ipv6 ospf packet Command Example
FTOS#debug ipv6 ospf packet
OSPFv3 packet related debugging is on for all interfaces
05:21:01 : OSPFv3: Sending, Ver:3, Type:1(Hello), Len:40, Router
ID:223.255.255.254, Area ID:0, Inst:0, on Po 255
05:21:03 : OSPFv3: Received, Ver:3, Type:1(Hello), Len:40, Router
ID:223.255.255.255, Area ID:0, Chksum:a177, Inst:0, from Vl 100
05:20:25 : OSPFv3: Sending, Ver:3, Type:4(LS Update), Len:580, Router
ID:223.255.255.254, Area ID:0, Inst:0, on Vl 1000
FTOS#
Table 38-15. debug ip ospf Output Fields
Field
OSPFv3...
05:21:01
Sending Ver:3
Type:
Length:
Router ID:
Area ID:
Chksum:
default-information originate
c e
Configure FTOS to generate a default external route into the OSPFv3 routing domain.
Syntax
default-information originate [always [metric metric-value] [metric-type type-value]]
[route-map map-name]
To return to the default, use the no default-information originate command.
Parameters
always
metric metric-value
Added support for C-Series
Introduced
Description
Debugging is on for all OSPFv3 packets and all interfaces
Displays the time stamp.
Sending OSPF3 version.
Displays the type of packet sent:
•
1 - Hello packet
•
2 - database description
•
3 - link state request
•
4 - link state update
•
5 - link state acknowledgement
Displays the packet length.
Displays the OSPF3 router ID.
Displays the Area ID.
Displays the OSPF3 checksum.
(OPTIONAL) Enter the keyword
information must always be advertised.
(OPTIONAL) Enter the keyword
configure a metric value for the route.
Range: 1 to 16777214
always
to indicate that default route
metric
followed by the number to
Open Shortest Path First (OSPFv2 and OSPFv3) | 1067
Advertisement
