Advertisement
Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands
debug ip ospf
c e s
Syntax
Parameters
1012
|
Open Shortest Path First (OSPFv2 and OSPFv3)
clear ip ospf process-id statistics [interface name {neighbor router-id}]
process-id
interface name
neighbor router-id
No defaults values or behavior
EXEC Privilege
Version 7.8.1.0
Introduced support for Multi-Process OSPF.
Version 7.6.1.0
Introduced on S-Series
Version 7.5.1.0
Introduced on C-Series
Version 7.4.1.0
Introduced on E-Series
show ip ospf statistics
Display debug information on OSPF. Entering debug ip ospf enables OSPF debugging for the first
OSPF process,.
debug ip ospf process-id [bfd |event | packet | spf]
To cancel the debug command, enter no debug ip ospf.
process-id
Enter the OSPF Process ID to debug a specific process.
If no Process ID is entered, command applies only to the first OSPF process.
bfd
(OPTIONAL) Enter the keyword
event
(OPTIONAL) Enter the keyword
packet
(OPTIONAL) Enter the keyword
spf
(OPTIONAL) Enter the keyword
Enter the OSPF Process ID to clear statistics for a specific process.
If no Process ID is entered, all OSPF processes are cleared.
(OPTIONAL) Enter the keyword
following interface keywords and slot/port or number information:
For a 1-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
•
For a Port Channel interface, enter the keyword
followed by a number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to
512 for ExaScale.
For a SONET interface, enter the keyword
information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
For a VLAN, enter the keyword
(OPTIONAL) Enter the keyword
router-id in dotted decimal format (A.B.C.D.).
Display the OSPF statistics
bfd
to debug only OSPF BFD information.
event
to debug only OSPF event information.
packet
to debug only OSPF packet information.
spf
to display the Shortest Path First information.
interface
followed by one of the
GigabitEthernet
port-channel
sonet
followed by the slot/port
vlan
followed by a number from 1 to 4094.
neighbor
followed by the neighbor's
Advertisement
