Advertisement
show running-config monitor session
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Example
Usage
Information
Related
Commands
1148
|
Port Monitoring
Display the running configuration of all monitor sessions or a specific session.
show running-config monitor session {session-ID}
To display the running configuration for all monitor sessions, use just the show running-config
monitor session command.
session-ID
No default values or behavior
EXEC
EXEC Privilege
Version 8.1.1.0
Introduced on E-Series ExaScale
Version 7.7.1.0
Introduced on S-Series
Version 7.5.1.0
Introduced on C-Series
Version 7.4.1.0
Introduced on E-Series
FTOS#show running-config monitor session
!
monitor session 8
source GigabitEthernet 10/46 destination GigabitEthernet 10/1 direction rx
!
monitor session 11
source GigabitEthernet 10/0 destination GigabitEthernet 10/47 direction rx
FTOS#show running-config monitor session 11
!
monitor session 11
source GigabitEthernet 10/0 destination GigabitEthernet 10/47 direction rx
The monitoring command is saved in the running configuration at the Monitor Session mode level and
can be restored after a chassis reload.
monitor session
show monitor session
(OPTIONAL) Enter a session identification number.
Range: 0 to 65535
Create a session for monitoring.
Display a monitor session.
Advertisement
