Download Print this page

Dell Force10 TeraScale E Series Reference Manual page 1191

Ftos command line, ftos 8.4.2.7

Advertisement

Related
ip access-list extended
Commands
ip access-list standard
match ip access-group
match ip precedence
match ip dscp
match mac access-group
match mac dot1p
match mac vlan
service-queue
show qos class-map
clear qos statistics
c e s
Clears Matched Packets, Matched Bytes, and Dropped Packets. For TeraScale, clears Matched
Packets, Matched Bytes, Queued Packets, Queued Bytes, and Dropped Packets.
Syntax
clear qos statistics interface-name.
Parameters
interface-name
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
Version 7.6.1.0
History
Version 7.5.1.0
pre-Version 6.1.1.1
Usage
E-Series Only Behavior
Information
If a Policy QoS is applied on an interface when clear qos statistics is issued, it will clear the egress
counters in show queue statistics and vice versa. This behavior is due to the values being read
from the same hardware registers.
The clear qos statistics command clears both the queued and matched byte and packet counters if
the queued counters incremented based on classification of packets to the queues because of
policy-based QoS. If the queued counters were incremented because of some other reason and do not
reflect a matching QoS entry in CAM, then this command clears the matched byte and packet counters
only.
Related
show qos statistics
Commands
Configure an extended IP ACL.
Configure a standard IP ACL.
Configure the match criteria based on the access control list (ACL)
Identify IP precedence values as match criteria
Configure the match criteria based on the DSCP value
Configure a match criterion for a class map, based on the contents of the
designated MAC ACL.
Configure a match criterion for a class map, based on a dot1p value.
Configure a match criterion for a class map based on VLAN ID.
Assign a class map and QoS policy to different queues.
View the current class map information.
Enter one of the following keywords:
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
Display qos statistics.
followed by the slot/port information.
followed by the slot/port information.
Quality of Service (QoS) | 1191

Advertisement

loading