After the reply is received and the new key is authenticated, you must delete the old key. Dell Force10
recommends keeping only one key per interface.
ip ospf mtu-ignore
c e s
Disable OSPF MTU mismatch detection upon receipt of database description (DBD) packets.
Syntax
ip ospf mtu-ignore
To return to the default, enter no ip ospf mtu-ignore.
Defaults
Enabled
Command Modes
INTERFACE
Command
Version 7.6.1.0
History
Version 7.5.1.0
pre-Version 6.1.1.1
ip ospf network
c e s
Set the network type for the interface.
ip ospf network {broadcast | point-to-point}
Syntax
To return to the default, enter no ip ospf network.
Parameters
broadcast
point-to-point
Defaults
Not configured.
Command Modes
ROUTER OSPF
Command
Version 7.8.1.0
History
Version 7.6.1.0
Version 7.5.1.0
pre-Version 6.1.1.1
Note:
The MD5 secret is stored as plain text in the configuration file with service password
encryption.
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
Enter the keyword
network.
Enter the keyword
point-to-point network.
Introduced support for Multi-Process OSPF.
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
broadcast
to designate the interface as part of a broadcast
point-to-point
to designate the interface as part of a
Open Shortest Path First (OSPFv2 and OSPFv3) | 1025