Advertisement
rate
burst-KB
Burst size is 10 KB. Granularity for rate is Mbps unless the kbps option is used.
Defaults
Command Modes
QOS-POLICY-OUT
Command
Version 8.2.1.0
History
Version 7.6.1.0
Version 7.5.1.0
pre-Version 6.1.1.1
Usage
rate-shape can be applied only as an aggregate policy. If it is applied as a class-based policy, then
Information
rate-shape will not take effect.
On 40-port 10G line cards, if the traffic is shaped between 64 and 1000kbs, for some values the shaped
rate is much less than the value configured. Do not use values in this range for 10G interfaces.
Related
rate shape
Commands
qos-policy-output
service-policy input
c e s
Apply an input policy map to the selected interface.
Syntax
service-policy input policy-map-name [layer2]
To remove the input policy map from the interface, use the no service-policy input
policy-map-name [layer2] command.
Parameters
policy-map-name
layer2
Defaults
Layer 3
Command Modes
INTERFACE
Command
Version 7.6.1.0
History
Version 7.5.1.0
Version 7.4.1.0
pre-Version 6.1.1.1
Enter the outgoing rate in multiples of 10 Mbps.
Range: 10 to 10000
(OPTIONAL) Enter a number as the burst size in KB.
Range: 0 to 10000
Default: 10
kbps
Added
option on C-Series, E-Series, and Series.
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
Shape the traffic output of the selected interface.
Create a QoS output policy.
Enter the name for the policy map in character format (16 characters
You can identify an existing
maximum).
exist.
does not yet
(OPTIONAL) Enter the keyword
Default: Layer 3
Introduced on S-Series
Introduced on C-Series
E-Series Only: Expanded to add support for Layer 2
Introduced on E-Series
policy map or name one that
layer2
to specify a Layer 2 Class Map.
Quality of Service (QoS) | 1205
Advertisement
