Advertisement
show dot1x interface
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Example
SSH Server and SCP Commands
1310
|
Security
Display the 802.1X information on an interface.
show dot1x interface interface
interface
Enter one of the following keywords and slot/port or number information:
For a Gigabit Ethernet interface, enter the keyword GigabitEthernet
•
followed by the slot/port information.
•
For a Fast Ethernet interface, enter the keyword
slot/port information.
•
For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
No default values or behavior
EXEC
EXEC privilege
Version 7.6.1.0
Introduced on C-Series, E-Series, and S-Series
Figure 51-5. show dot1x interface command Example
FTOS#show dot1x int Gi 2/32
802.1x information on Gi 2/32:
-----------------------------
Dot1x Status:
Enable
Port Control:
AUTO
Port Auth Status:
UNAUTHORIZED
Re-Authentication:
Disable
Untagged VLAN id:
None
Guest VLAN:
Enable
Guest VLAN id:
10
Auth-Fail VLAN:
Enable
Auth-Fail VLAN id:
11
Auth-Fail Max-Attempts: 3
Tx Period:
30 seconds
Quiet Period:
60 seconds
ReAuth Max:
2
Supplicant Timeout:
30 seconds
Server Timeout:
30 seconds
Re-Auth Interval:
3600 seconds
Max-EAP-Req:
2
Auth Type:
SINGLE_HOST
Auth PAE State:
Initialize
Backend State:
Initialize
FTOS#
FTOS supports SSH Protocol versions 1.5 and 2.0. Secure Shell (SSH) is a protocol for
secure remote login over an insecure network. SSH sessions are encrypted and use
authentication.
•
crypto key generate
FastEthernet
followed by the
Advertisement
