Advertisement
access-class
c e s
Restrict incoming connections to a particular IP address in a defined IP access control list (ACL).
Syntax
access-class access-list-name
To delete a setting, use the no access-class command.
Parameters
access-list-name
Defaults
Not configured.
Command Modes
LINE
Command
Version 7.6.1.0
History
Version 7.5.1.0
pre-Version 6.2.1.1
Related
line
Commands
ip access-list standard
ip access-list extended
enable password
c e s
Change the password for the
Syntax
enable password [level level] [encryption-type] password
To delete a password, use the no enable password [encryption-type] password [level level]
command.
Parameters
level level
encryption-type
password
Defaults
No password is configured. level = 15
Command Modes
CONFIGURATION
Command
Version 7.6.1.0
History
Version 7.5.1.0
pre-Version 6.1.1.0
Enter the name of an established IP Standard ACL.
Introduced for S-Series
Introduced for C-Series
Introduced on E-Series
Apply an authentication method list to designated terminal lines.
Name (or select) a standard access list to filter based on IP address.
Name (or select) an extended access list based on IP addresses or protocols.
enable
command.
(OPTIONAL) Enter the keyword
access.
Range: 1 to 15
(OPTIONAL) Enter the number
7
Enter a
followed by a text string as the hidden password. The text string must
be a password that was already encrypted by a Dell Force10 router.
Use this parameter only with a password that you copied from the
running-config
file of another Dell Force10 router.
Enter a text string, up to 32 characters long, as the clear text password.
Introduced for S-Series
Introduced for C-Series
Introduced for E-Series
level
followed by a number as the level of
7
0
or
as the encryption type.
show
Security | 1287
Advertisement
