Advertisement
Parameters
Command Modes
Command
History
Example
Usage
Information
show sflow linecard
c e s
Syntax
Parameters
Command Modes
1352
|
sFlow
interface
(OPTIONAL) Enter the following keywords and slot/port or number information:
•
For an 100/1000 Ethernet interface, enter the keyword
the slot/port information.
•
For a 1-Gigabit Ethernet interface, enter the keyword
the slot/port information.
•
For a Loopback interface, enter the keyword
to 16383.
•
For a SONET interface, enter the keyword
•
For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
EXEC
EXEC Privilege
Version 8.2.1.0
Introduces on S-Series Stacking
Version 8.1.1.0
Introduced on E-Series ExaScale
Version 7.7.1.0
Introduced on S-Series
Version 7.6.1.0
Introduced on C-Series
Version 6.2.1.1
Introduced on E-Series
Figure 53-2. show sflow Command Example
FTOS#show sflow
sFlow services are enabled
Global default sampling rate: 32768
Global default counter polling interval: 20
1 collectors configured
Collector IP addr: 133.33.33.53, Agent IP addr: 133.33.33.116, UDP port: 6343
0 UDP packets exported
0 UDP packets dropped
165 sFlow samples collected
0 sFlow samples dropped due to sub-sampling
Linecard 1 Port set 0 H/W sampling rate 8192
Gi 1/16: configured rate 8192, actual rate 8192, sub-sampling rate 1
Gi 1/17: configured rate 16384, actual rate 16384, sub-sampling rate 2
Linecard 3 Port set 1 H/W sampling rate 16384
Gi 3/40: configured rate 16384, actual rate 16384, sub-sampling rate 1
FTOS#
The dropEvent counter (sFlow samples dropped due to sub-sampling) shown in the figure above will
always display a value of zero.
Display the sFlow information on a line card.
show sflow linecard {slot number}
slot number
(OPTIONAL) Enter a slot number to view information on the line card in that slot.
Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on a E300.
EXEC
GigabitEthernet
GigabitEthernet
loopback
followed by a number from 0
sonet
followed by the slot/port information.
TenGigabitEthernet
This count is always zero (0)
followed by
followed by
Advertisement
