Advertisement
Parameters
Defaults
Command Modes
Command
History
Related
Commands
distribute-list out
c e s
Syntax
Parameters
1240
|
Router Information Protocol (RIP)
prefix
list-name
Enter the name of a configured prefix list.
-
interface
(OPTIONAL) Identifies the interface type slot/port as one of the following:
•
•
•
•
•
Not configured.
ROUTER RIP
Version 7.8.1.0
Introduced on S-Series
Version 7.6.1.0
Introduced on C-Series
pre-Version 6.2.1.1
Introduced on E-Series
ip prefix-list
Enter the PREFIX-LIST mode and configure a prefix list.
Configure a filter for outgoing routing updates.
distribute-list prefix-list-name out [interface | bgp | connected | isis | ospf | static]
To delete the filter, use the no distribute-list prefix-list-name out command.
prefix
list-name
Enter the name of a configured prefix list.
-
interface
(OPTIONAL) Identifies the interface type slot/port as one of the following:
•
•
•
•
•
connected
(OPTIONAL) Enter the keyword
routes.
For a 1-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
For a Port Channel interface, enter the keyword
number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for
ExaScale.
For a SONET interface, enter the keyword
information.
For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
For a VLAN, enter the keyword
For a 1-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
For a Port Channel interface, enter the keyword
number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for
ExaScale.
For a SONET interface, enter the keyword
information.
For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
For a VLAN, enter the keyword
connected
GigabitEthernet
port-channel
sonet
followed by the slot/port
TenGigabitEthernet
vlan
followed by a number from 1 to 4094.
GigabitEthernet
port-channel
sonet
followed by the slot/port
TenGigabitEthernet
vlan
followed by a number from 1 to 4094.
to filter only directly connected
followed by a
followed by a
Advertisement
