Dell Force10 TeraScale E Series Reference Manual page 1375

Command
Version 7.6.1.0
History
Version 7.5.1.0
E-Series legacy command
Related
clear logging
Commands
default logging console
show logging
logging facility
c e s
Configure the Syslog facility, used for error messages sent to Syslog servers.
Syntax logging facility [facility-type]
To return to the default values, enter no logging facility.
Parameters
facility-type
Defaults local7
Command Modes
CONFIGURATION
Support added for S-Series
Support added for C-Series
Clear logging buffer.
Returns the logging console parameters to the default setting.
Display logging settings and system messages in the internal buffer.
(OPTIONAL) Enter one of the following parameters.
• auth (authorization system)
• cron (Cron/at facility)
• deamon (system deamons)
• kern (kernel)
• local0 (local use)
• local1 (local use)
• local2 (local use)
• local3 (local use)
• local4 (local use)
• local5 (local use)
• local6 (local use)
• local7 (local use)
• lpr (line printer system)
• mail (mail system)
• news (USENET news)
• sys9 (system use)
• sys10 (system use)
• sys11 (system use)
• sys12 (system use)
• sys13 (system use)
• sys14 (system use)
• syslog (Syslog process)
• user (user process)
• uucp (Unix to Unix copy process)
The default is local7.
SNMP and Syslog | 1375