Advertisement
Example
Figure 57-2. show storm-control broadcast Command Example (C-Series)
FTOS#show storm-control broadcast gigabitethernet 3/24
Broadcast storm control configuration
Interface
-----------------------------------------------
Gi 3/24
FTOS#
show storm-control multicast
c s
Display the storm control multicast configuration.
Syntax
show storm-control multicast [interface]
Parameters
interface
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
Version 7.6.1.0
History
Example
Figure 57-3. show storm-control multicast Command Example
FTOS#show storm-control multicast gigabitethernet 1/0
Multicast storm control configuration
Interface
-----------------------------------------------
Gi 1/0
FTOS#
show storm-control unknown-unicast
c e s
Display the storm control unknown-unicast configuration
Syntax
show storm-control unknown-unicast [interface]
Direction
Packets/Second
Ingress
(OPTIONAL) Enter one of the following interfaces to display the interface specific storm
control configuration.
•
For Fast Ethernet, enter the keyword
information.
•
For a 1-Gigabit Ethernet interface, enter the keyword
the slot/port information.
•
For a 10-Gigabit Ethernet interface, enter the keyword
by the slot/port information.
Introduced on C-Series and S-Series
Direction
Packets/Second
Ingress
1000
Fastethernet
followed by the slot/port
GigabitEthernet
TenGigabitEthernet
5
followed by
followed
Storm Control | 1411
Advertisement
