Advertisement
Command Modes
EXEC Privilege
Command
Version 7.6.1.0
History
Version 7.5.1.0
pre-Version 6.1.1.0
Example
Figure 51-4. show users Command Example
FTOS#show user
*
FTOS#
Table 1
Table 1 show users Command Example Fields
Field
(untitled)
Line
User
Host(s)
Location
Related
username
Commands
timeout login response
c e s
Specify how long the software will wait for login input (for example, user name and password) before
timing out.
Syntax
timeout login response seconds
To return to the default values, enter no timeout login response.
Parameters
seconds
Defaults
see above
Command Modes
LINE
Command
Version 7.6.1.0
History
Version 7.5.1.0
pre-Version 6.1.1.0
Introduced for S-Series
Introduced for C-Series
Introduced for E-Series
Line
User
0 console 0
admin
3 vty 1
admin
describes the information in the show users command example.
Enable a user.
Enter a number of seconds the software will wait before logging you out.
Range:
VTY: 1 to 30 seconds, default: 30 seconds.
Console: 1 to 300 seconds, default: 0 seconds (no timeout).
AUX: 1 to 300 seconds, default: 0 seconds (no timeout).
Introduced for S-Series
Introduced for C-Series
Introduced for E-Series
Host(s)
idle
idle
Description
Indicates with a * which terminal line you are using.
Displays the terminal lines currently in use.
Displays the user name of all users logged in.
Displays the terminal line status.
Displays the IP address of the user.
Location
172.31.1.4
Security | 1293
Advertisement
