Advertisement
Version 7.7.1.0
Version 7.5.1.0
IPv6 PIM Commands
The following commands apply to IPv6 PIM-SM and PIM-SSM:
•
•
•
•
•
•
•
•
•
IPv6 PIM-Source Specific Mode Commands
The IPv6 PIM-SSM commands are:
•
•
ipv6 pim ssm-range
e
Specify the SSM group range using an access-list.
ipv6 pim ssm-range {access_list_name}
Syntax
Parameters
access_list_name
Defaults
Default SSM range is 232/8 and ff3x/32
Command Modes
CONFIGURATION
Command
Version 7.5.1.0
History
Usage
Once the SSM range is applied, the changes are applied internally without requiring clearing of the
Information
TIB. SSM ACL overrides the default range. To use the default range while SSM range is active, add
the default range to the SSM ACL.
When ACL rules change, the ACL manager and PIM modules apply the new rules automatically.
Introduced on C-Series.
Introduced on E-Series.
clear ipv6 pim tib
debug ip pim
ipv6 pim dr-priority
ipv6 pim join-filter
ipv6 pim query-interval
ipv6 pim neighbor-filter
show ipv6 pim interface
show ipv6 pim neighbor
show ipv6 pim tib
ipv6 pim ssm-range
show ipv6 pim ssm-range
Introduced
Enter the name of the access list. Maximum 16 characters.
PIM-Source Specific Mode (PIM-SSM) | 1133
Advertisement
