Advertisement
Version 7.5.1.0
Version 6.2.1.1
Example
Figure 50-1. debug spanning-tree rstp bpdu Command Example
FTOS#debug spanning-tree rstp bpdu gigabitethernet 2/0 ?
in Receive (in)
out Transmit (out)
description
c e s
Enter a description of the Rapid Spanning Tree
description {description}
Syntax
To remove the description, use the no description {description} command.
Parameters
description
Defaults
No default behavior or values
Command Modes
SPANNING TREE (The prompt is "config-rstp".)
Command
pre-7.7.1.0
History
Related
protocol spanning-tree rstp
Commands
disable
c e s
Disable RSTP globally on the system.
disable
Syntax
To enable Rapid Spanning Tree Protocol, enter no disable.
Defaults
RSTP is disabled
Command Modes
CONFIGURATION RSTP (conf-rstp)
Command
Version 7.6.1.0
History
Version 7.5.1.0
Version 6.2.1.1
Related
protocol spanning-tree rstp
Commands
Support added for C-Series
Introduced for E-Series
Enter a description to identify the Rapid Spanning Tree (80 characters maximum).
Introduced
Enter SPANNING TREE mode on the switch.
Support added for S-Series
Support added for C-Series
Introduced for E-Series
Enter the Rapid Spanning Tree mode
Rapid Spanning Tree Protocol (RSTP) | 1267
Advertisement
