Advertisement
Command Modes
Command
History
Usage
Information
show privilege
c e s
Syntax
Command Modes
Command
History
Example
Related
Commands
show users
c e s
Syntax
Parameters
1292
|
Security
CONFIGURATION
Version 7.6.1.0
Introduced for S-Series
Version 7.5.1.0
Introduced for C-Series
pre-Version 6.1.1.0
Introduced for E-Series
Caution:
Encrypting passwords with this command does not provide a high level of security.
When the passwords are encrypted, you cannot return them to plain text unless you
re-configure them. To remove an encrypted password, use the no password password
command.
To keep unauthorized people from viewing passwords in the switch configuration file, use the
password-encryption
command. This command encrypts the clear-text passwords created for user
name passwords, authentication key passwords, the privileged command password, and console and
virtual terminal line access passwords.
To view passwords, use the
View your access level.
show privilege
EXEC
EXEC Privilege
Version 7.6.1.0
Introduced for S-Series
Version 7.5.1.0
Introduced for C-Series
pre-Version 6.1.1.0
Introduced for E-Series
Figure 51-3. show privilege Command Output
FTOS#show privilege
Current privilege level is 15
FTOS#
privilege level (CONFIGURATION mode)
View information on all users logged into the switch.
show users [all]
all
(OPTIONAL) Enter the keyword
show running-config
command.
Assign access control to different command modes.
all
to view all terminal lines in the switch.
service
Advertisement
