Advertisement
default-information originate
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
1014
|
Open Shortest Path First (OSPFv2 and OSPFv3)
Table 38-1. Output Descriptions for debug ip ospf process-id packet
Field
Description
N, MC, E, T
Displays information available in the Options field of the HELLO packet:
•
N + (N-bit is set)
•
N - (N-bit is not set)
•
MC+ (bit used by MOSPF is set and router is able to forward IP multicast packets)
•
MC- (bit used by MOSPF is not set and router cannot forward IP multicast packets)
•
E + (router is able to accept AS External LSAs)
•
E - (router cannot accept AS External LSAs)
•
T + (router can support TOS)
•
T - (router cannot support TOS)
hi:
Displays the amount of time configured for the HELLO interval.
di:
Displays the amount of time configured for the DEAD interval.
dr:
Displays the IP address of the designated router.
bdr:
Displays the IP address of the Border Area Router.
Configure the FTOS to generate a default external route into an OSPF routing domain.
default-information originate [always] [metric metric-value] [metric-type type-value]
[route-map map-name]
To return to the default values, enter no default-information originate.
always
metric metric-value
metric-type type-value
route-map map-name
Disabled.
ROUTER OSPF
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version 6.1.1.1
(OPTIONAL) Enter the keyword
information must always be advertised.
(OPTIONAL) Enter the keyword metric followed by a number to configure a
metric value for the route.
Range: 1 to 16777214
(OPTIONAL) Enter the keyword
state type of 1 or 2 for default routes. The values are:
•
1 = Type 1 external route
•
2 = Type 2 external route.
(OPTIONAL) Enter the keyword
established route map.
Introduced support for Multi-Process OSPF.
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
always
to specify that default route
metric-type
followed by an OSPF link
route-map
followed by the name of an
Advertisement
