Advertisement
Usage
If a Policy QoS is applied on an interface when clear queue statistics egress is issued, it will
Information
clear the egress counters in show queue statistics and vice-versa. This behavior is due to the values
being read from the same hardware registers.
Related
clear queue statistics egress
Commands
show queue statistics egress
show queue statistics ingress
clear queue statistics ingress
e
Clear ingress queue statistics.
Syntax
clear queue statistics ingress [unicast [src-card ID [dst-card ID ]] | [multicast] [src-card
ID ]]
Parameters
unicast [src-card ID
[
dst-card ID]]
multicast [src-card ID
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
Version 6.2.1.1
History
Related
clear queue statistics egress
Commands
show queue statistics egress
show queue statistics ingress
show queue statistics egress
e
Display the egress queue statistics.
Syntax
show queue statistics egress [unicast | multicast] [Interface] [brief]
Clear ingress queue statistics
Display egress queue statistics
Display ingress queue statistics
(OPTIONAL) Enter the keyword
statistics. Optionally, enter the source card identification (
and the destination card identification (
statistics from the source card to the destination card.
]
(OPTIONAL) Enter the keyword
queue statistics. Optionally, enter the source card identification
src-card ID)
(
Default: Both Unicast and Multicast queue statistics are cleared.
Introduced
Clear egress queue statistics
Display egress queue statistics
Display ingress queue statistics
unicast
to clear Unicast queue
dst-card ID)
multicast
to clear the multicast statistics from the source card.
src-card ID)
to clear the unicast
to clear only Multicast
Quality of Service (QoS) | 1225
Advertisement
