Download Print this page

Dell Force10 TeraScale E Series Reference Manual page 1386

Ftos command line, ftos 8.4.2.7

Advertisement

Parameters
Command Modes
Usage
Information
delay triggers
e
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
1386
|
SONET
authentication
(OPTIONAL) Enter the keyword
exchanges (Challenge Authentication Protocol (CHAP) packet exchanges and
Password Authentication Protocol (PAP) exchanges) and traffic.
error
(OPTIONAL) Enter the keyword
errors.
negotiation
(OPTIONAL) Enter the keyword
at startup.
packet
(OPTIONAL) Enter the keyword
interface sonet
Enter the keywords
slot
port
/
EXEC Privilege
If you enter
debug ppp
without parameters, all parameters are enabled.
Delay triggering the line or path alarms with a 100ms delay.
delay triggers {line [lrdi | sd-ber | sf-ber] | path [pais | prdi]}
To disable delay trigger (the default), enter no delay triggers {line [lrdi | sd-ber | sf-ber] | path
[pais | prdi]} command.
line
lrdi
sd-ber
sf-ber
path
pais
prdi
Disabled
INTERFACE
Version 7.4.2.0
Added path option
By default, certain alarms (LOS, LOF, LAIS, PLOP) bring the line protocol down immediately. Use
this command, with the line option, to delay that trigger event by 100ms.
By default, path alarms (AIS, RDI, LOP) do not cause (or trigger) the interface line protocol to go
down. This command, with the path option, can be used to trigger this action with a delay of 100ms.
authentication
error
negotiation
packet
interface sonet
line
Enter the keyword
to delay the specified line alarm.
(OPTIONAL) Enter the keyword
indicator.
(OPTIONAL) Enter the keyword
BER errors.
(OPTIONAL) Enter the keyword
errors.
path
Enter the keyword
to delay the specified path alarm.
(OPTIONAL) Enter the keyword
signal.
(OPTIONAL) Enter the keyword
indication.
to display PPP authentication
to display PPP error statistics and protocol
to display PPP settings negotiated
to display low-level packet dumps.
followed by the slot and port information.
lrdi
to specify line remote defect
sd-ber
to specify signal degradation
sf-ber
to specify signal failure BER
pais
to specify path alarm indication
prdi
to specify the path remote defect

Advertisement

loading