Advertisement
•
•
•
•
•
•
•
•
•
•
•
•
•
•
area default-cost
c e s
Set the metric for the summary default route generated by the area border router (ABR) into the stub
area. Use this command on the border routers at the edge of a stub area.
Syntax
area area-id default-cost cost
To return default values, use the no area area-id default-cost command.
Parameters
area-id
cost
Defaults
cost = 1; no areas are configured.
Command Modes
ROUTER OSPF
Command
Version 7.8.1.0
History
Version 7.6.1.0
Version 7.5.1.0
pre-Version 6.1.1.1
Usage
In FTOS, cost is defined as reference bandwidth/bandwidth.
Information
Related
area stub
Commands
show ip ospf database nssa-external
show ip ospf database opaque-area
show ip ospf database opaque-as
show ip ospf database opaque-link
show ip ospf database router
show ip ospf database summary
show ip ospf interface
show ip ospf neighbor
show ip ospf routes
show ip ospf statistics
show ip ospf topology
show ip ospf virtual-links
summary-address
timers spf
Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a number from zero
(0) to 65535.
Specifies the stub area's advertised external route metric.
Range: zero (0) to 65535.
Introduced support for Multi-Process OSPF.
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
Create a stub area.
Open Shortest Path First (OSPFv2 and OSPFv3) | 1007
Advertisement
