Advertisement
Parameters
Defaults
Command Modes
Command
History
rmon event
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
1256
|
Remote Monitoring (RMON)
controlEntry integer
owner name
No default behavior
CONFIGURATION INTERFACE (config-if)
Version 7.6.1.0
Support added for S-Series
Version 7.5.1.0
Support added for C-Series
Version 6.1.1.0
Introduced for E-Series
Add an event in the RMON event table.
rmon event number [log] [trap community] [description string] [ownername]
To disable RMON on an interface, use the no rmon event number [log] [trap community]
[description string] command.
number
log
trap community
description string
owner name
as described above
CONFIGURATION
Version 7.6.1.0
Support added for S-Series
Version 7.5.1.0
Support added for C-Series
Version 6.1.1.0
Introduced for E-Series
controlEntry
Enter the keyword
using a value. Then enter an integer value from 1 to 65535 that identifies the
RMON Statistic Table. The integer value must be a unique in the RMON
Statistic Table.
(OPTIONAL) Enter the keyword
record the owner of the RMON group of statistics.
Assign an event number in integer format from 1 to 65535. The number
value must be unique in the RMON Event Table.
(OPTIONAL) Enter the keyword
log entry is triggered and sets the eventType in the RMON MIB to log or
log-and-trap.
Default: No log
(OPTIONAL) Enter the keyword
string to configure the eventType setting in the RMON MIB. This sets either
snmp-trap or log-and-trap.
Default: public
(OPTIONAL) Enter the keyword
describing the event.
(OPTIONAL) Enter the keyword
owner of this event.
to specify the RMON group of statistics
owner
followed by the owner name to
log
to generate an RMON log entry. The
trap
followed by an SNMP community
description
followed by a string
owner
followed by the name of the
Advertisement
