Advertisement
distance
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
distance ospf
c e s
Syntax
Parameters
Defaults
1016
|
Open Shortest Path First (OSPFv2 and OSPFv3)
Define an administrative distance for particular routes to a specific IP address.
distance weight [ip-address mask access-list-name]
To delete the settings, use the no distance weight [ip-address mask access-list-name] command.
weight
ip-address
mask
access-list-name
110
ROUTER OSPF
Version 7.8.1.0
Introduced support for Multi-Process OSPF.
Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to
16 characters long.
Version 7.6.1.0
Introduced on S-Series
Version 7.5.1.0
Introduced on C-Series
pre-Version 6.1.1.1
Introduced on E-Series
Configure an OSPF distance metric for different types of routes.
distance ospf [external dist3] [inter-area dist2] [intra-area dist1]
To delete these settings, enter no distance ospf.
external dist3
inter-area dist2
intra-area dist1
external dist3 = 110; inter-area dist2 = 110; intra-area dist1 = 110.
Specify an administrative distance.
Range: 1 to 255.
Default: 110
(OPTIONAL) Enter a router ID in the dotted decimal format.
If you enter a router ID, you must include the mask for that router address.
(OPTIONAL) Enter a mask in dotted decimal format or /n format.
(OPTIONAL) Enter the name of an IP standard access list, up to 140 characters.
(OPTIONAL) Enter the keyword
distance for external type 5 and 7 routes.
Range: 1 to 255
Default: 110.
(OPTIONAL) Enter the keyword
distance metric for routes between areas.
Range: 1 to 255
Default: 110.
(OPTIONAL) Enter the keyword
distance metric for all routes within an area.
Range: 1 to 255
Default: 110.
external
followed by a number to specify a
inter-area
followed by a number to specify a
intra-area
followed by a number to specify a
Advertisement
