Advertisement
PIM-Dense Mode (PIM-DM)
Overview
PIM-DM is supported on E-Series ExaScale
PIM-DM is supported on E-Series TeraScale
8.4.2.0. and later.
For information on the commands required to configure and use PIM-Dense Mode (PIM-DM), refer to:
•
•
IPv4 PIM-Dense Mode Commands
The IPv4 PIM-Dense Mode (PIM-DM) commands are:
•
IPv4 PIM Commands on page 1131
IPv4 PIM-Dense Mode Commands
ip pim dense-mode
e
in FTOS 8.1.1.0. and later.
x
e
c
, C-Series
, and S-Series
t
40
s
platforms in FTOS
PIM-Dense Mode (PIM-DM) | 1095
Advertisement
