Advertisement
Usage
Information
ip pim query-interval
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
ip pim register-filter
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
1104
|
PIM-Sparse Mode (PIM-SM)
Do not enter this command before creating the access-list.
Change the frequency of PIM Router-Query messages.
ip pim query-interval seconds
To return to the default value, enter no ip pim query-interval seconds command.
seconds
Enter a number as the number of seconds between router query messages.
Default: 30 seconds
Range: 0 to 65535
30 seconds
INTERFACE
Version 8.1.1.0
Introduced on E-Series ExaScale
Version 7.8.1.0
Introduced on C-Series on port-channels and S-Series
Use this feature to prevent a PIM source DR from sending register packets to an RP for the specified
multicast source and group.
ip pim register-filter access-list
To return to the default, use the no ip pim register-filter access-list command.
access-list
Not configured
CONFIGURATION
Version 7.8.1.0
Introduced on C-Series and S-Series
Version 7.6.1.0
Introduced
The access name is an extended IP access list that denies PIM register packets to RP at the source DR
based on the multicast and group addresses. Do not enter this command before creating the access-list.
Enter the name of an extended access list. Maximum 16 characters.
Advertisement
