Advertisement
Version 7.5.1.0
E-Series legacy command
Usage
If the interface is expected to flap during normal usage, you could disable this command.
Information
Syslog Commands
The following commands allow you to configure logging functions on all Dell Force10 switches:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
clear logging
c e s
Clear the messages in the logging buffer.
Syntax
clear logging
Defaults
None.
Command Modes
EXEC Privilege
Command
Version 7.6.1.0
History
Version 7.5.1.0
E-Series legacy command
Related
show logging
Commands
Support added for C-Series
clear logging
default logging buffered
default logging console
default logging monitor
default logging trap
logging
logging buffered
logging console
logging facility
logging history
logging history size
logging monitor
logging on
logging source-interface
logging synchronous
logging trap
show logging
show logging driverlog stack-unit (S-Series)
terminal monitor
Support added for S-Series
Support added for C-Series
Display logging settings and system messages in the internal buffer.
SNMP and Syslog | 1371
Advertisement
