Advertisement
Parameters
Default
Command Modes
Command
History
Usage
Information
Related
Commands
router-id
c e
Syntax
Parameters
Defaults
Command Modes
1076
|
Open Shortest Path First (OSPFv2 and OSPFv3)
bgp as number
connected
static
metric metric-value
metric-type
type-value
route-map
map-name
tag tag-value
Not configured.
ROUTER OSPFv3
Version 7.8.1.0
Added support for C-Series
Version 7.4.1.0
Introduced
To redistribute the default route (x:x:x:x::x), configure the
default-information originate
Designate a fixed router ID.
router-id ip-address
To return to the previous router ID, use the no router-id ip-address command.
ip-address
The router ID is selected automatically from the set of IPv4 addresses configured on a router
ROUTER OSPF
bgp
Enter the keyword
followed by the autonomous system number.
Range: 1 to 65535
connected
Enter the keyword
connected interfaces.
static
Enter the keyword
redistribute manually configured routes.
metric
Enter the keyword
followed by the metric value.
Range: 0 to 16777214
Default: 20
(OPTIONAL) Enter the keyword
state type of 1 or 2 for default routes. The values are:
1 = Type 1 external route
2 = Type 2 external route
Default: 2
(OPTIONAL) Enter the keyword
established route map. If the route map is not configured, the default is deny (to
drop all routes).
(OPTIONAL) Enter the keyword
OSPFv3.
Range: 0 to 4294967295
Default: 0
Configure default external route into OSPFv3
Enter the router ID in the dotted decimal format.
to redistribute routes from physically
metric-type
followed by the OSPFv3 link
route-map
followed by the name of an
tag
to set the tag for routes redistributed into
default-information originate
command.
Advertisement
