Advertisement
show qos statistics
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
1216
|
Quality of Service (QoS)
View QoS statistics.
show qos statistics {wred-profile [interface]} | [interface]
wred-profile interface
interface
No default behavior or values
EXEC
EXEC Privilege
Version 7.7.1.1
Introduced on S-Series
Version 7.5.1.0
Introduced on C-Series
pre-Version 6.1.1.1
Introduced on E-Series
The show qos statistics command can be used on the C-Series, but the wred-profile keyword
must be omitted in the syntax. The show qos statistics output differs from the ED and EE series line
cards and the EF series line cards. The QoS statistics for the EF series generates two extra columns,
Queued Pkts and Dropped Pkts, see Example 2.
Note:
The show qos statistics command displays Matched Packets and Matched Bytes.
The
show queue statistics egress
Queued Bytes. The following example explains how these two displays relate to each other.
•
9000 byte size packets are sent from Interface A to Interface B.
•
The Matched Packets on Interface A are equal to the Queued Packets on Interface B.
•
Matched bytes on Interface A = matched packets *9000
•
Queued bytes on Interface B = queued packets *(9020)—Each packet has an additional
header of 20 bytes.
Platform—E-Series Only
optionally one of the following keywords and slot/port or number
information:
•
For a Fast Ethernet interface, enter the keyword
followed by the slot/port information.
•
For a Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
•
For a SONET interface, enter the keyword
port information.
•
For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
Enter one of the following keywords and slot/port or number information:
•
On the C-Series and E-Series, For a Fast Ethernet interface, enter the
FastEthernet
keyword
•
For a Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
•
For a SONET interface, enter the keyword
port information.
•
For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
command (E-Series only) displays Queued Packets and
wred-profile
: Enter the keyword
FastEthernet
GigabitEthernet
sonet
followed by the slot/
followed by the slot/port information.
GigabitEthernet
sonet
followed by the slot/
and
Advertisement
