Dell Force10 TeraScale E Series Reference Manual page 1348

sflow extended-router enable
e
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
sflow extended-switch enable
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
1348 | sFlow
Enable packing information on a router and switch.
sflow extended-router [extended-switch] enable
To disable packing information, use the no sflow extended-router [extended-switch] enable
command.
extended-switch
Enter the keyword
enable
Enter the keyword
Disabled
CONFIGURATION
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series
FTOS 7.8.1.0 and later enhances the sFlow implementation for real time traffic analysis on the
E-Series to provide extended gateway information in cases where the destination IP addresses are
learned by different routing protocols, and for cases where the destination is reachable over ECMP.
sflow extended-gateway enable
sflow extended-switch enable
show sflow
Enable packing information on a switch only.
sflow extended-switch enable
To disable packing information, use the no sflow extended-switch [enable] command.
enable
Disabled
CONFIGURATION
Version 8.2.1.0 Introduces on S-Series Stacking
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series
extended-switch
enable
to enable global extended information.
Enable packing information on an extended gateway
Enable packing information on a switch.
Display the sFlow configuration
enable
Enter the keyword to enable global extended information.
to collect extended switch information.