Advertisement
snmp-server user
c e s
Syntax
Parameters
1368
|
SNMP and Syslog
Configure a new user to an SNMP group.
snmp-server user name {group_name remote ip-address udp-port port-number} [1 | 2c | 3]
[encrypted] [auth {md5 | sha} auth-password] [priv des56 priv password] [access-list-name
| ipv6 access-list-name | access-list-name ipv6 access-list-name]
To remove a user from the SNMP group, use the no snmp-server user name {group_name
remote ip-address udp-port port-number} [1 | 2c | 3 ] [encrypted] [auth {md5 | sha}
auth-password] [priv des56 priv password] [access-list-name | ipv6 access-list-name |
access-list-name ipv6 access-list-name] command.
name
group_name
remote ip-address
udp-port
port-number
|
1
2c | 3
encrypted
auth
md5
|
sha
auth-password
priv des56
priv password
Enter the name of the user (not to exceed 20 characters), on the host, that
connects to the agent.
Enter a text string (up to 20 characters long) as the name of the group.
Defaults: The following groups are created for mapping to read/write
community/security-names.
•
v1v2creadu — maps to a community with
1v2cwriteu —
•
maps to a community
remote
Enter the keyword
followed by the IP address that identifies the copy of
the SNMP on the remote device.
udp-port
Enter the keyword
port number on the remote device.
Range: 0 to 65535.
Default: 162
(OPTIONAL) Enter the security model version number (
1
•
is the least secure version
3
•
is the most secure of the security modes.
2c
•
allows transmission of informs and counter 64, which allows for integers
twice the width of what is normally allowed.
1
Default:
(OPTIONAL) Enter the keyword
encrypted format (a series of digits, masking the true characters of the string).
(OPTIONAL) Enter the keyword
without encryption.
(OPTIONAL) Enter the keyword
level.
md5
— Message Digest Algorithm
sha
— Secure Hash Algorithm
(OPTIONAL) Enter a text string (up to 20 characters long) password that will
enable the agent to receive packets from the host.
Minimum: 8 characters long
(OPTIONAL) Enter the keyword
authentication level setting using the CBC-DES privacy authentication algorithm
des56
(
).
(OPTIONAL) Enter a text string (up to 20 characters long) password that will
enables the host to encrypt the contents of the message it sends to the agent.
Minimum: 8 characters long
ro
permissions
rw
permissions
followed by the UDP (User Datagram Protocol)
1
2c
,
encrypted
to specify the password appear in
auth
to specify authentication of a packet
md5
sha
or
to designate the authentication
priv des56
to initiate a privacy
3)
, or
.
Advertisement
