Advertisement
show vlan private-vlan mapping
c s
Syntax
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
switchport mode private-vlan
c s
Syntax
Parameters
1162
|
Private VLAN (PVLAN)
show vlan private-vlan mapping
switchport mode private-vlan
Display primary-secondary VLAN mapping.
show vlan private-vlan mapping
none
EXEC
EXEC Privilege
Version 7.8.1.0
Introduced on C-Series and S-Series
The output of this command, shown below, displays the community and isolated VLAN IDs that are
associated with each primary VLAN.
Figure 45-5. show vlan private-vlan mapping Command Output
FTOS# show vlan private-vlan mapping
Private Vlan:
Primary
: 100
Isolated
: 102
Community : 101
Unknown
: 200
private-vlan mode
show interfaces private-vlan
show vlan private-vlan mapping
switchport mode private-vlan
Set the PVLAN mode of the selected port.
[no] switchport mode private-vlan {host | promiscuous | trunk}
To remove the PVLAN mode from the selected port, use the no switchport mode private-vlan
command.
host
Enter
PVLAN, as described above.
Display primary-secondary VLAN mapping.
Set the PVLAN mode of the selected port.
Set the mode of the selected VLAN to either community or isolated.
Display type and status of PVLAN interfaces.
Display primary-secondary VLAN mapping.
Set the PVLAN mode of the selected port.
host
to configure the selected port or port channel as an isolated interface in a
Advertisement
