ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
CLEAR-Flow Commands
disable clear-flow
disable clear-flow
Description
Disable the CLEAR-Flow agent.
Syntax Description
This command has no arguments or variables.
Default
CLEAR-Flow is disabled by default.
Usage Guidelines
When the CLEAR-Flow agent is disabled, sampling stops and the and all rules are left in the current
state. It will not reset actions that were taken while CLEAR-Flow was enabled.
Example
The following example disables CLEAR-Flow on the switch:
disable clear-flow
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on the BlackDiamond 10808 and BlackDiamond 12804 platforms only.
1102
ExtremeWare XOS 11.5 Command Reference Guide