Mpls Traffic-Eng Router-Id - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

mpls traffic-eng router-id

[ no ] mpls traffic-eng router-id interfaceType interfaceSpecifier
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies a stable interface to be used as a router ID for MPLS traffic engineering
Description
with IS-IS or OSPF, typically a loopback interface. The interface acts as the destination
node for tunnels originating at other nodes. The no version removes the interface
as a router ID.
Options
Router Configuration
Mode
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
Chapter 13: M Commands
mpls traffic-eng router-id
1413