ABB CRB 1100 Product Manual page 92

3 Installation and commissioning
3.5.2 Customer connections
Continued
ii
Connector kits (optional)
Connector kits, wrist
The table describes the CP/CS and Ethernet (if any) connector kits for wrist.
Position
Connector kits
Protection covers
Protection covers for water and dust proofing
Protection covers are delivered together with the robot and must be well fitted to
the connectors in any application requiring water and dust proofing.
Always remember to refit the protection covers after removing them.
xx1900000132
A
B
C
92
If the lead-through device is installed, the C2 connector will be used for the lead-through device
and 6 wires are occupied.
Description
CP/CS
Ethernet
CP/CS or Ethernet connector protection covers
SMB connector protection cover
Air hose connector protection covers
© Copyright 2021-2023 ABB. All rights reserved.
M12 CPCS Male straight connect-
or kits
M12 CPCS Male angled connector
kits
M12 Ethernet Cat5e Male straight
connector kits
M12 Ethernet Cat5e Male angled
connector kits
(A)
(B)
(C)
Art. no.
3HAC066098-001
3HAC066099-001
3HAC067413-001
3HAC067414-001
(C)
Product manual - CRB 1100
3HAC078007-001 Revision: J