ABB CRB 1100 Product Manual page 76

3 Installation and commissioning
3.3.7 Installation of lead-through device
Continued
2
3
Installing the lead-through device (two-button type)
1
2
Continues on next page
76
Action
Insert the lead-through device to the base.
Turn the adjusting knob to lock the lead-through
device.
Note
Do not use excessive force!
The arrow in the figure indicates the direction of
locking the lead-through device.
Action
Install the device base to the adaptor.
Insert the lead-through device to the base.
© Copyright 2021-2023 ABB. All rights reserved.
Note
xx2000002224
xx2000002225
Note
Screw: M4x16 12.9 Lafre
2C2B/FC6.9 (4 pcs)
Tightening torque: 3 Nm
xx2200000763
xx2200000764
Product manual - CRB 1100
3HAC078007-001 Revision: J