ABB CRB 1100 Product Manual page 509

4
5
6
Product manual - CRB 1100
3HAC078007-001 Revision: J
Action
Refit the screws and washers.
Note
Do not tighten the screws yet.
Install the timing belt to the pulleys and verify that
the belt runs correctly in the grooves of the pul-
leys.
Install an M4x25 or longer adjustment screw to
the motor.
Note
Do not insert the entire screw to the hole.
© Copyright 2021-2023 ABB. All rights reserved.
5 Repair
5.7.3 Replacing the axis-3 motor
Continued
Note
Screw: M4x12 12.9 Lafre
2C2B/FC6.9 (3 pcs)
Washer, 3HAC063985-001 (3 pcs)
xx1800003009
xx1800003022
xx1900000009
Continues on next page
509