ABB CRB 1100 Product Manual page 181

5
Removing the battery pack
1
2
3
4
Product manual - CRB 1100
3HAC078007-001 Revision: J
Action
Remove the SMB cover completely from the base.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit read the safety information in section
unit is sensitive to ESD on page
Disconnect the battery cable.
Remove the battery pack by cutting the cable
strap.
© Copyright 2021-2023 ABB. All rights reserved.
4.6.1 Replacing the battery pack
Note
Note
The
48.
xx1800002469
xx1800002470
4 Maintenance
Continued
Continues on next page
181