ABB CRB 1100 Product Manual page 635

Refitting the gearbox
Use these procedures to refit the axis-4 gearbox.
Refitting the axis-4 gearbox
1
Product manual - CRB 1100
3HAC078007-001 Revision: J
Action
Refit the axis-4 gearbox.
Make sure the locking screw holes on the gearbox
and extender unit or wrist are aligned with each
other.
© Copyright 2021-2023 ABB. All rights reserved.
5.8.4 Replacing the axis-4 gearbox
Note
xx1800003310
Valid for CRB 1100-4/0.475
xx1800003313
Valid for CRB 1100-4/0.58
xx1800003312
Continues on next page
5 Repair
Continued
635