ABB CRB 1100 Product Manual page 195

4
5
6
7
Product manual - CRB 1100
3HAC078007-001 Revision: J
Action
Remove the connector plate.
CAUTION
Be aware of the cablings that are attached to the
connector plate! The connector plate cannot be
removed completely until the connectors are re-
move from the plate.
Disconnect the connector.
• J2.FB2
Tip
Take photos of the connector and cable position
before disconnecting them, to have as a reference
when reconnecting.
Snap loose and remove the female head of the
connector from the connector plate.
Remove the swing cover.
© Copyright 2021-2023 ABB. All rights reserved.
5.3.1 Replacing the upper cable package
Note
xx1800002489
xx1800002490
xx1800002491
xx1800002492
Continues on next page
5 Repair
Continued
195