ABB CRB 1100 Product Manual page 481

2
3
Separating the cable package from the base
1
2
Product manual - CRB 1100
3HAC078007-001 Revision: J
Action
Disconnect the connectors.
• FB1
• MP1
Tip
Take photos of the connector and cable position
before disconnecting them, to have as a reference
when reconnecting.
Snap loose and remove the female head of the
connectors from the connector plate.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
Remove the cable bracket.
© Copyright 2021-2023 ABB. All rights reserved.
5 Repair
5.7.1 Replacing the axis-1 motor
Continued
Note
xx1800003613
xx1800003314
Note
xx1800003042
Continues on next page
481