ABB CRB 1100 Product Manual page 417

7
Reconnecting the axis-3 motor connectors
1
2
3
Product manual - CRB 1100
3HAC078007-001 Revision: J
Action
Remove the adjustment screw from the motor.
Action
Slide the connectors into the connector plate and
reconnect the connectors.
• FB3
• MP3
Tip
See the number markings on the connectors for
help to find the corresponding connector.
Route and secure the cabling with cable straps.
CAUTION
Correct cable routing is highly important.
If the cables are routed and secured incorrectly
the cables can be damaged.
Refit the cable bracket.
© Copyright 2021-2023 ABB. All rights reserved.
5 Repair
5.6.1 Replacing the housing
Continued
Note
xx1900000009
Note
xx1800003005
Screw: M2.5x6 12.9 Lafre
2C2B/FC6.9 (2 pcs)
Tightening torque: 0.6 Nm
xx1800003006
Continues on next page
417