ABB CRB 1100 Product Manual page 255

Securing the lower cable package to the axis-1 gearbox
1
Product manual - CRB 1100
3HAC078007-001 Revision: J
Action
Make sure that:
• The hole on the cable protection tube is
aligned with the locking screw hole on the
gearbox.
• The cable protection tube surface is com-
pletely parallel with the pulley cover at one
side and with the flange at the other side.
© Copyright 2021-2023 ABB. All rights reserved.
5.3.2 Replacing the lower cable package
Note
xx1800003063
xx1800003049
xx1800003050
Continues on next page
5 Repair
Continued
255