ABB CRB 1100 Product Manual page 99

Product manual - CRB 1100
3HAC078007-001 Revision: J
Four installation configurations are predefined, Up, Right, Down and Left.
Observe your device and refer to the following table to make sure the actual
device installation position is consistent with the selected configuration.
Device type Observe...
•
No-button type
•
The following figure takes the configuration Up as an example.
xx2100000173
The device details are as follows.
xx2200000597
© Copyright 2021-2023 ABB. All rights reserved.
3 Installation and commissioning
The ABB logo on the device is in the correct direction.
The indicator on the lead-through is in the correct relative
position with the lamp unit on the process hub.
3.7.3 Lead-through
Continued
Continues on next page
99