ABB CRB 1100 Product Manual page 299

2
3
4
Product manual - CRB 1100
3HAC078007-001 Revision: J
Action
Check the cooling pad.
Replace if damaged.
Install the timing belt to the motor pulley and
verify that the belt runs correctly in the groove of
the pulley.
Orient the motor correctly and fit it into the base.
At the same time, install the timing belt to the
gearbox pulley and verify that the belt runs cor-
rectly in the groove of the pulley.
© Copyright 2021-2023 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the base
Continued
Note
Cooling pad for axis-1 and -2 mo-
tors: 3HAC071020-001
xx1800003602
xx1800003085
Motor orientation: orient the motor
according to the figure below, in
regard to the encircled motor con-
nector.
xx1800003072
Continues on next page
299